All the sweet bikes and parts. Mmm … parts.
Lee,
I am looking to build a new wheel set for my Demo 7. I have narrowed the rims down to Syncros DS28 and Mavic 823. Do you have any input regarding either of these? I am trying to stay on the lite side.
Lee
GREAT site! Love it! If you have time for a quick question I would love your insight. Living in Texas good first hand information on mountain biking is no easy to find. =) I use to race moto x in the pro class for years just local with few national races nothing huge but I have experience on two wheels.
My cousin Chris Myers of Colorado Springs races DH etc he was sponsored by Brodie Bikes for a while.
MY QUESTION: I will be visiting him in Aug and do some riding. I’m 6’0 175lbs he told me to go ahead and plan on getting a the Yeti 575. I have seen the new Yeti ASR-7 I did read your article about the 575 vs the ASR. Do you have any insight on the AS-R 7 I e-mailed Yeti and they said it would be out July 2008. I found this article but would like your input: http://www.bikeradar.com/news/article/yetis-dramatic-new-seven-up-close-12577
James Robertson
Brian just raced a prototype Ibis hardtail in a 4X in Poland, and he sure made it work. Here’s the press release from his wife Paula:
Hi Lee!
I have a 2007 base level Enduro. I recently have gotten into jumping and I think I want to change out
the rear shock from a DHX air 3.0 to a DHX 5.0 coil. Is this possible? A guy at a bike shop said that the lower end Enduro is actually a different frame from the higher ends and he’s not sure if it will accept that much travel. Any help you could offer would be much appreciated!
Thanks!
Andrew
Lee,
It is that time of the year…getting prepped for Whistler and my riding season. I am having a hard time identifying what the best bike would be for whistler. I am trying to decide between an SX Trail or the Demo 7. Could you let me know how you would approach this decision?
Marv
The new Specialized Eskar trail/all-mountain tire has been out for a while, and people are getting some miles on it. More than you wanted to know:
Hey Lee,
I have a slight problem with my rear end (on the bike). I have a 05 Jamis Dakar XLT with Mavic crossmax XL wheels and the problem I am having is my rear tire sits slightly to the left.
I have already replaced the entire rear triangle and swing arm and even when I put another wheel in its place it still sits crooked. It is really annoying because whenever I pit down the power the tire rubs the chainstay when I mash the right crank. I am baffled about what to do next. Can you give me a few ideas on what the trouble might be?
Thanks a lot, Chris
Lee –
I recently rode my friend’s brand new Santa Cruz Nomad. He’s got it set up for heavy duty free ride and can run the Northstar DH trails on it. He’s got WTB LaserDisc FR (30MM wide) with 2.3 Weirwolfs on them. I ride a Heckler with similar compnents but am using the WTB LaserDisc XC (24mm wide) with the same weirwolfs.
My question is would simply rim width explain why his bike feel so much more stable and planted going down hill over things and around turns? His bike felt like a DH bike and mine like a XC bike.
Thanks, Scot
Lee, I am looking to convert my ’05 Gary Fisher GED into a better pump track / dirt jump rig. The main thing is the fork, right now it has a 130mm Marzocchi Drop-Off. I’m thinking of swapping it for a 100mm fork, like the Marzocchi 4X. What other forks should I be considering? Anything else you would recommend to make this bike BRAAAP! on a pump track?
Thanks for the cool site, Tom
Hey Lee, I have a Giant VT2 which runs a Manitou 3-way rear shock. It will cost me a bit to get it serviced and change all of the parts….ok…I just needed an excuse to upgrade. I’ve been looking at the Fox RP23, my questions are:
Read more
Hey Lee,
A little bike maintainance question concerning the hub/pawl drive assembly on modern mtb wheels like mavics or azonic outlaws, etc. Since these wheels have sealed bearings, should you put any lubrication inside the freewheel or on the drive pawls? If so, should I use grease, oil, or what? (It seems like the lubricant just attacts dirt to me) Or should I just clean everything and leave it dry? After all the bearings in the wheel are sealed. Also, what about the skewers? Grease them or leave them clean and dry? Hope you can solve this mystery for me?
Walt
Hey Lee,
I like wearing Vans Old Skool shoes when riding but the sole is pretty flexy. Is there a stiffer insert that I could put in to make it flex less? The stiffer inserts I have seen aren’t full length which I think would work the best. Any ideas?
Thanks, Brian